GY-GPS6MV2 is WAAS (Wide Area Augmentation System) enabled GPS unit and is compatible with UART capable devices including Arduino, Raspberry Pi, MSP430, and MSP432.
Power the module and it will automatically acquire satellite signals and a position fix. Once it has a position fix the module will blink the on board LED. This LED will continue to blink while the module has a position fix.
Specifications:
- Input Supply: 3.3V-6V (On board voltage regulator maintains 3.3V)
- I/O Maximum Logic Level: 3.6V
- Works fine with direct connection to the 5V serial pins on an Arduino, however, for extended periods of time always practice level shifting the 5V TX signal using Bi-directional I2C Logic Level Converter or CD4050BE
- <1 second to first fix (TTFF) for hot starts
- 27 seconds to first fix (TTFF) for cold starts
- UART: 9600 baud by default, but is configurable from 4800 to 115200 baud
- External EEPROM for configuration storage
- Position Accuracy: 2 m and better with multiple good satellite signals
- Velocity Accuracy: 0.1 m/s
- Maximum Velocity: 500 m/s
- Heading Accuracy: 0.5 degrees while moving
- Operating Modes:
- Continuous operating modes
- Maximum Performance Mode: Continuously uses the acquisition engine, resulting in the best possible time to first fix
- Eco Mode: Optimizes the use of the acquisition engine to minimize current consumption
- Intermittent operating mode
- Power Save Mode: Draws only 11mA – Utilizes cyclic tracking, with configurable update periods, which reduces the average power consumption significantly
- Continuous operating modes
What’s included:
- 1 x NEO-6M GY-GPS6MV2 GPS module with on board EEPROM
- 1 x GPS antenna
Downloads:
- GY-GPS6MV2 Datasheet
- How to Interface GPS Module (NEO-6m) with Arduino
- Arduino Library
- u-blox u-centersetup_v8.29
Muhammad Mirza –
MUHAMMAD SAAD UDDIN –
The device is not operating although I have connected the wired as mentioned in the manual.
Shahid Ayub –
damaged / faulty unit received. It is the first purchase but got disappointed. Even the return procedure is a hassle / time taking. Th new unit should be sent as soon the fault reported but instead a lengthy process was communicated to sent the unit back first and then replacement will be provided.
Muhammad Anis Ur Rehman –
I really love your product as i experience before, on the other hand your customer relationship is also good but your service regarding TCS is very bad. because as i ordered this item 4-5 day before but i still not received.
Shahid Mahmood –
Did not work. The bulb is recognised but registration does not complete after finding ID. Tested on 3 different routers including zong device. I even changed dns. disappointed